Rolling a cigar is no less than just art that and has been done by experts for more than a decade.
One has to be patient to learn how to roll a cigar and master this technique.
It gives you a sense of self-appreciation and confidence to roll your cigar. Additionally, it’s less expensive and more customizable.
Rolling a cigar is a fun hobby if you love to smoke a cigar.
- Is It Cheaper to Roll Your Own Cigars?
- Considerations on How to Roll a Cigar
- How Do You Roll a Perfect Cigar: The Steps
- How Cigars Are Rolled: The Conclusion
Is It Cheaper to Roll Your Own Cigars?
Yes, it’s cheaper to roll your own cigars once you become an expert on the entire rolling process.
Not only that, but it gives you a sense of independence by allowing you to be creative during the cigar rolling process.
Considerations on How to Roll a Cigar
The proper way of how to roll cigars by hand would depend on a lot of factors.
Some of the most important ones that you need to keep in mind are:
If you know how to roll a cigar but don’t know how to select leaves, the entire rolling process will go to waste.
The tobacco leaves are the main foundation of hand-rolled cigars. It depends on you whether to grow on your own or get from the specialized stores.
The next step is to select the leaves for a cover sheet. It’s a key material since it gives the cigar’s final form by holding the tobacco filling inside.
You can use small to large thin leaves as the outer layer. You must inspect the leaves by touching them and choose the ones with the following three qualities:
- Large size
Only the leaves with the above three characteristics can hold the rest of the tobacco leaves together by creating an authentic cigar layer.
After selecting the leaves, you must cut out the central veins using regular scissors or a clerical knife.
The next step is to choose the binding leaves, which serve as a gasket between the cover sheets and cigar filling.
These leaves can be of lesser quality than the leaves chosen for the cover. Lastly, you can buy tobacco in zip-lock bags from tobacco shops.
You can also combine three different leaves such as Ligero, Volado, and Seco, as the cigar fillers.
- Ligero: Increases taste and intensity
- Volado: Ensures combustión
- Seco: Provides aroma
Humidifying and Storing the Leaves
Before anything, wet the leaves using a sprayer. You can also buy a unique humidifier to enhance moisture in the environment where you want to roll a cigar.
You can also pour water into a plastic bag or a container and put leaves in it.
However, the duration of both the humidification and water soaking is different. The end goal is to make the leaves supple and flexible.
You require a mold press comprising two wooden boards of one to two inches thickness.
That said, you can also make a DIY mold using two wooden boards and later use sandpaper to smooth out their surfaces.
You can also calculate the depth of the mold by comparing the diameter of an already-rolled cigar.
You need a thin and sharp knife such as a carving knife. Lastly, you need colorless glue and not just ordinary glue.
What Glue Is Used for Cigars?
You can’t use any ordinary glue to roll a cigar. It’s recommended to visit the tobacco market and buy a natural bond with no smell.
A cigar glue is a particular organic fixture that looks like a milky, viscous paste.
It’s essentially a food-safe adhesive, which gets a sticky form from plants, starch, and dextrin combination.
You can also use bermocoll, non-acid pectin, and gum arabic depending upon your preference.
How Do You Roll a Perfect Cigar: The Steps
Once you have carefully combined and prepared the above ingredients can you ensure a cigar’s integrity and tightness.
Also, the rate of natural decay depends on how cigars are rolled initially.
1. Bundle the Leaves
First, you must take the filling leaves in the form of a bundle to make an optimal cigar of six to seven inches.
You must place thick tobacco leaves in the middle and wrap them to form a laminated structure.
It depends on you to select the number of leaves and packing density.
2. Create a Flat Cylinder
The next step is to place a pre-sealed binder sheet on the table and place the bundle on the tip with a 45 degrees turn and start rolling.
Once you obtain a flat cylinder, the binding process of the tobacco filling is complete. Now, you can cut the remnants of the sheet using a knife.
3. Glue the Leaves Together
The next step is to determine the cigar’s head location. You should keep in mind that the tip should be with a more conical structure.
You must use a special cigar glue to prevent the tearing of the binding sheet. Once the base is ready, you have to seal the tobacco product in the cover sheet.
Repeat the same process at an angle of 45 degrees and roll the cover sheet. Later, glue together the cover sheet at the head’s tip and cut with a sharp knife.
4. Seal With a Cover Sheet
The last and final step is to seal the cigar using a cover sheet in a semi-circle shape and cover the cigar’s head.
It’s essential to keep the cigar in the modeling press for two to three days and periodically turn to ensure a smooth and flat surface.
How Cigars Are Rolled: The Conclusion
Cigar rolling is a combination of art and science, requiring skill, patience, and practice.
All you need are the tobacco leaves, knife, and cigar glue to roll a cigar with your own hands.
Then, follow the steps on how to roll cigars by hand we shared above and enjoy your personalized cigar.
You must be careful while classifying the tobacco leaves as binders, fillers, and wrappers.
Once you master yourself in rolling a cigar, you can personalize your cigar smoking experience by varying its length and intensity.